CERAMIC FEEDSTOCKS | Quality Assurance

INMATEC Technologies GmbH is annually certified after ISO 9001:2015. We are producing and working according to international quality standards.

The feedstock quality is controlled permanently. Powder and binder are checked in an incoming components inspection and have to be released for the feedstock production.

After the feedstock production the feedstock is controlled regarding the binder amount to guarantee the consistent shrinkage from batch to batch.

Every standard or customer-sized feedstock is delivered with a certificate of quality.

We test every produced feedstock on our injection moulding machines with regard to its processability. Our customers receive the results in the form of an injection moulding protocol.

Based on customer's wishes we can provide further research:

Powder Analysis

  • Chemical composition
  • Phase analysis
  • Particle size
  • Specific surface

Feedstock Analysis

  • Rheology
  • Injection moulding tests
  • Debinding properties

Part Analysis

  • Microstructure analysis (optical microscopy)
  • Scanning electron microscopy
  • Element mapping
  • etc.

 Certificate ISO 9001:2015


© INMATEC Technologies GmbH 2008-2021